|Message: Illegal parameter (0) </vis/open OGL 600x600-0+0> when trying to run example N06||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi everyone! I've been working with this problem for a week now and I just can't figure it out;
I've gone through all the relevant threads I could find, and I've double checked and tripled checked to make sure OpenGL/X11 were installed properly;
I installed Geant4 using below:
cmake -DCMAKE_INSTALL_PREFIX=~/Desktop/Research/Geant4/geant4.9.6.p02-install -DGEANT4_INSTALL_DATA=ON -DGEANT4_USE_GDML=ON -DGEANT4_USE_OPENGL_X11=ON ~/Desktop/Research/Geant4/geant4.9.6.p02
and it ran through fine But when running example N06 with
export G4WORKDIR=~/Desktop/Research/Geant4 source ~/Desktop/Research/Geant4/geant4.9.6.p02-install/bin/geant4.sh sudo cmake -DGeant4_DIR=~/Desktop/Research/Geant4/geant4.9.6.p02-install/lib/Geant4-9.6.2 -DGEANT4_USE_OPENGL_X11=ON -DGEANT4_USE_RAY_TRACER_X11=ON ~/Desktop/Research/Geant4/N06
CMake Warning: Manually-specified variables were not used by the project:
and when running ./exampleN06 the build stops part way through and idles with the error ***** Illegal parameter (0) <vis/open OGL 600x600-0+0> *****
***** Batch is interrupted!! *****
Please help? >:
|Inline Depth:||Outline Depth:||Add message:|