|Message: Re: Qt5 problem||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, Yes, Qt5 is not ready for the moment, and you should use Qt 4.8. We hope that all will be ready in Geant4 for including Qt5 in the 9.10 release ! Thanks Zach for this good explanation about installing Qt4.8, I have nothing to add, only not forget to switch GEANT4_USE_QT =ON at configuration step. Laurent Le 16 mai 2013 à 21:50, Zach Hartwig <email@example.com> a écrit : > > *** Discussion title: Installation and Configuration > > Hi Leonardo, > > I can't speak for the Geant4 build team so I don't know if they have > plans to upgrade to Qt 5.0 in the near future. > > In order to build Geant4 on your system, you'll have to download the Qt > 4.0 libraries (most recent is Qt 4.8.4) and build them before you build > Geant4. The libraries are available here: > http://qt-project.org/downloads > > I suggest download the tar.gz file and building Qt from source. > Instructions for building on X11 platforms can be found here: > http://qt-project.org/doc/qt-4.8/install-x11.html > > If you install Qt somewhere other than the usual places (/usr/lib, > /usr/local, etc) that are not in your path, please be sure to use the > CMake variables for setting the path to your Qt installation. > > Hope this helps. > > ~ZSH > > ------------------------------------------------------------- > Visit this GEANT4 at hypernews.slac.stanford.edu message (to reply or unsubscribe) at: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/installconfig/1552/1.html
|Inline Depth:||Outline Depth:||Add message:|