|Message: Re: problem installing and registering visualisation graphics systems||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Wed, 25 Apr 2012 19:16:44 GMT, Faiz Lotfy wrote: > I also have used different set of configurations; the simplest was: > cmake -DCMAKE_INSTALL_PREFIX=/opt/G4 -DGEANT4_INSTALL_DATA=ON > -DCLHEP_ROOT_DIR=/usr/local/lib/clhep ~/g4 > > And the full one: > > cmake -DCMAKE_INSTALL_PREFIX=/opt/Geant4 -DGEANT4_INSTALL_DATA=ON > -DXERCESC_ROOT_DIR=/usr/local/xerces-c-3/ -DGEANT4_USE_QT=ON > -DGEANT4_USE_OPENGL_X11=ON -DGEANT4_USE_RAYTRACER_X11=ON > -DGEANT4_USE_XM=ON -DCLHEP_ROOT_DIR=/usr/local/lib/clhep ~/g4
The second one is needed to enable the visualization drivers. Provided the configuration with CMake runs without error and when you do the build there are no errors, then you should have a working install of Geant4.
> All of them compiled well, to the best I know, and once I finish compiling geant4.9.5.p1 and try the eamples (of course I needed to compile geant4.9.5.p1/source/ for some granular library complain) I am always offended with this message (I am trying example N02): > You have successfully registered the following graphics systems. > Current available graphics systems are: > ASCIITree (ATree) > DAWNFILE (DAWNFILE) > G4HepRep (HepRepXML) > G4HepRepFile (HepRepFile) > RayTracer (RayTracer) > VRML1FILE (VRML1FILE) > VRML2FILE (VRML2FILE) > gMocrenFile (gMocrenFile)
How are you building your application? With CMake or with the Geant4 GNUmakefile system? In the former case, example N02 should just work, provided you are pointing it to your actuall install of 9.5.p01. In the case of the GNUmakefiles, have you sourced the
|Inline Depth:||Outline Depth:||Add message:|