|Message: Re: VS2010 And Geant4 4.9.5||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Fri, 16 Mar 2012 20:03:12 GMT, Youming Yang wrote: > I have followed the guide to successful building the Geant4 solution, > but am stuck in the next step of generating a separate solution set of > project files that contain the user codes, such as all the examples, and > some of my own old code. I am unsure how to go about setting the > projects up properly, as there are so many configuration options > available and I am afraid of it not being able to compile properly. > > Is there a section in any of the documentation that describes this?
There's brief detail on this in Section 3.2 of the Installation Guide, plus more detailed information at the CMake level in Appendix 5 of the Application Developers Guide. There is also a walkthrough of building example B1 using CMake/VS2010. Hope that helps!
|Inline Depth:||Outline Depth:||Add message:|