|Message: Re: Compiling LEND physics lsit and linking to it||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Fri, 03 Feb 2012 22:03:41 GMT, Elena Novikova wrote: > Ben, you are right, I created my setup completely from scratch - the > solution and the project files are of my own creation. The reason was > that I didn't have VS 2010 or 2009, I only had 2008.
You could still try the CMake build using VS2008, as CMake should be o.k. generating project files for that edition. We can't guarantee functionality of Geant4 on Win7+VS2008, but if you are really tied to VS2008 (and so can't upgrade to VS2010) then I would give that a go.