|Message: Pargeant4 and ROOT||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have been using geant4 and ROOT without any problems over the past few months. To enable parallel computing on my dual core PC, I used the ParN02 example with TOP-C implementation. It compiled and ran successfully.
Then, like I normally do in my simulations, I included the ROOT libraries in the geant4 codes, after making the necessary changes in the GNUmakefile. The program compiled successfully. But after running all the events, the program exits giving a segmentation violation and a "make error 1". Also, though a text file is filled with the desired data, my root file has not been filled.
What corrections should I make?
Thanks in advance,