|Message: Re: Linking problem with geant4.9.4.p02 (latest) (Can't find symbols from G4Xt)||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I was able to resolve this linking problem, but only by:
1) Deleting the entire geant4.9.4.p02 tree
(Running ./Configure --build again did not fix it.)
2) Changing the options such that the OpenGL visualization drivers were built (both of them).
Note that doing 2) and THEN 1) in that order DID NOT fix it.
It was evident that the file G4Xt.o did not have the required symbols in it before doing 1) and 2) above.