|Message: Re: linking error on Red Hat Linux 8 64bit||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Wed, 16 Mar 2011 11:51:45 GMT, Richard Gillham Darnley wrote: > g++ -W -Wall -ansi -pedantic -Wno-non-virtual-dtor -Wno-long-long > -Wwrite-strings -Wpointer-arith -Woverloaded-virtual -pipe -O2 -fPIC > -DG4OPTIMISE -Iinclude -I/home/rvd/CLHEP/include -DG4VERBOSE > -DG4_STORE_TRAJECTORY -DG4UI_USE_TCSH -DG4UI_USE -DG4VIS_USE_ASCIITREE > -DG4VIS_USE_DAWNFILE -DG4VIS_USE_GMOCRENFILE -DG4VIS_USE_HEPREPFILE > -DG4VIS_USE_RAYTRACER -DG4VIS_USE_VRMLFILE -DG4VIS_USE > -I/home/rvd/geant4/geant4.9.3.p02/include/ \ > -o /home/rvd/g4work/bin/Linux-g++/mulassis > /home/rvd/g4work/tmp/Linux-g++/mulassis/exe/mulassis.o > -L/home/rvd/CLHEP/lib -L/home/rvd/geant4/geant4.9.3.p02/lib/Linux-g++ > -L/home/rvd/g4work/tmp/Linux-g++/mulassis -Wl,-rpath > /home/rvd/g4work/tmp/Linux-g++/mulassis \ > -lmulassis -lG4Tree -lG4FR -lG4GMocren -lG4visHepRep -lG4RayTracer > -lG4VRML -lG4vis_management -lG4modeling -lG4interfaces -lG4persistency > -lG4error_propagation -lG4readout -lG4physicslists -lG4run -lG4event > -lG4tracking -lG4parmodels -lG4processes -lG4digits_hits -lG4track > -lG4particles -lG4geometry -lG4materials -lG4graphics_reps -lG4intercoms > -lG4global -lCLHEP -lm -lz
Thanks, which graphics driver options did you enable, in particular, did you enable RayTracerX, i.e. did you answer yes when Configure asked you "Enable building of the X11 RayTracer visualization driver?"?
Can you also run the following commands and post the output here:
I suspect either a mis-configured Geant4 installation or a missing/unfound X11 library...
> 2. I've check the permissions for Linux-g++.gmk and I get '-rw-r--r--' > should it not be '-rwer--r--'?
No, the '-rw-r--r--' is fine, it only needs to be be read.
> 3. LDFLAGS is not set in my environment (should it be?).
Again, no, it's just that this has caused odd errors in the past so I wanted to double check if this might be another symptom.
|Inline Depth:||Outline Depth:||Add message:|