|Message: Re: Loops in A01EventAction (hits in multiply placed volume?)||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear Asai-san, Thanks for your follow-up. Well, then an object of G4VSensitiveDetector can have (one or more) "logical" (not physical) volumes associated to it, and replicated volumes created from the same logical volume share a single G4VSensitiveDetector object (and hits are stored in a single collection), so to distinguish between the replicated volumes one must check the copy number or replica number of the physical volume. Am I correct? What's the difference between a copy number and a replica number? I've tried in my test code to see the difference, but both G4VTouchable::GetReplicaNumber() and G4VTouchable::GetCopyNumber() gave the same numbers. By the way, the latter half (outside of the '#ifdef G4ANALYSIS_USE' clause) of the method also contains the outer loop over layers/cells, but these are for grouping of the hits into layers, right? Many thanks in advance, Kazuyoshi
|Inline Depth:||Outline Depth:||Add message:|