|Message: How To define the Detector Efficiency||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi ! Everybody, I am sending again my question may be some body help.
I hope this time I will be lucky to get an answer.
I want to simulate gamma particles in my sensitive detector; The Gas Gap I The Gas Gap II which are the three regions of my sensitive detector.
I want to pass 10000 gammas and find the detector efficiency as; sen= Ni/No Where Ni= Number of charged particles reaching any of the GAS Gap I or IIin my RPC( detector) No is the numbr of orignal primary particles impinging on the RPC detector. 1) where and in which Class I can define this efficiency formula? and How to define it?
2) Because ,I want to plot the efficieny(my detector sensitivity) vs gamma energy graph( at different energy scales).
With best Wishes and regards.
Thanks for helping,
With best Wishes,
|Inline Depth:||Outline Depth:||Add message:|