|Message: Detector Efficiency( Sensitivity counts)||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi ! how you doing, I am beginner of G4. I have the following Detector set up which is like as: 0.005, // GND(copper) 0.100,//insulator 0.200, // bakelite1 **** 0.200, // Gas Gap I 0.200, // bakelite2 **** 0.000, //insulator 0.050, // strips(copper) 0.050, //base(bakelite) 0.050, //insulator 0.200, // bakelite3 **** 0.200, // Gas Gap II 0.200, // bakelite4 **** 0.100,Insulator 0.005 // GND(copper) I want to simulate gamma particles in my sensitive detector;Which are
The Gas Gap I
Strips(copper)( copper strips I took as the charged particle get detected on it)
The Gas Gap II,
which are the three regions of my sensitive detector, 1) Should I use the calorimetr types sensitive detector Or the Tracker types detector? Which one would be better for this kinds of simulation work?
I want to pass 10000 gammas and find the detector efficiency as; sen= Ni/No Where Ni= Number of charged particles reaching any of the GAS Gap I or IIin my RPC( detector) No is the numbr of orignal primary particles impinging on the RPC detector.
2) I want to plot the efficieny(my detector sensitivity) vs gamma energy graph( at different energy scales).How to do it?
Pls guide me step by step, as I am new in this field, how to make mine code and do some changes;I have already made my detector geometry.
I am sorry If I have sent wrong questions to this forum of hits,digitization and pile up group.
Hope you will help me and give me some suggestions!
With best Wishes,
|Inline Depth:||Outline Depth:||Add message:|