|Message: How to implement G4MultiFunctionalDetector in Multi-layer readout geometry?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have never used readout geometry before.
I was trying to construct a multi-layer Readout Geometry and using G4MultiFunctionalDetector to collect the energy deposited in each layer. I have done these in tracking geometry before by dividing the target into layers and set sensitivity for each layer with G4MultiFunctionalDetector and then collect the energy deposited in each layer in run.
Since the tracking geometry becomes irregular, I want to use readout geometry. But after dividing Readout geometry into layers, I don't know how to set sensitivity for each layer and implement G4MultiFunctionalDetector so I can collect the energy deposited in this layer in Run. I refered to example N04.
Any suggestion are appreciated. Thanks.