|Message: Re: Changes in inelastic scattering.||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
The change in going from 19 to 21 MeV is due to the difference in models. Below 20 MeV you have HP neutrons, above 20 you have G4PreCompound. However, it is best to have an overlap in model energy ranges to smooth out differences in behavior. I would suggest using 19.9 MeV for the upper limit of HP neutrons and 19 MeV for the lower limit of precompound. About the large peak below 4 MeV, because you are using HP models in this range, you are most likely seeing a resonance.
|Inline Depth:||Outline Depth:||Add message:|