|Message: About neutron's model ?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
In the neutron's processI added elastic, inelastic, capture and related hp(high precision) model.
I have question. In the example the model's min energy is set to 19Mev.
I think the Hp model's energy fit to 0-20MeV. In the simulation, which
model would be used when neutron's energy is at 0-20Mev. Hp model or
not Hp model?
Also when i set the min energy of capture model to 0.19MeV the capture
line can be seen. But when the min energy of capture model is 19MeV the
line can not be seen.
I use geant4 4.9.1. Any help would be thankful.
|Inline Depth:||Outline Depth:||Add message:|