|Message: How to calculate Photofission Yield in Geant4?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am a new user of Geant4. Now I would like to use Geant4 to calculate photo-fission yield of U238. The setup of geometry is following: 1. Convertor W. 2. 4 thin targets-U238 behind convertor W and to be parallel with it. Distance between convertor and first target is 5mm and distance between targets is 10mm. Physical process: 1. Electron beam (50MeV)hits on convertor to produce bremsstrahlung. 2. Photo-fission of U238 will be induced by bremmstrahlung from convertor.
I am very gratefull if anybody can tell me how to use Geant4 to calculate photo-fission yield and distribution of the fission fragments for this case. Thank you very much in advance! Phan Viet Cuong
|Inline Depth:||Outline Depth:||Add message:|