|Message: Re: Neutron decay implemented in RadioactiveDecay in Geant4.10.2.p2?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Thanks for your reply again.
So you mean the delayed neutrons and prompt neutrons can be both included in secondary list of nFission in HP model if I turn off the fission fragment? Does it apply on both versions of Geant4.10.2 and 10.1? Thanks a lot.
On Fri, 21 Oct 2016 23:55:36 GMT, Koi, Tatsumi wrote:
> Hi > > > As you mentioned, the RadioactiveDecay in Geant4.10.2.p2 is not ready > > for delayed neutrons yet, correct? Thanks. > > Basically correct, more properly, it is not ready for neutrons emission. > > You will have delayed neutrons, once you turn off the production of > fission fragments. (I assume you are using HP package for fissions) > > Tatsumi >
|Inline Depth:||Outline Depth:||Add message:|