|Message: Angular distribution from Hadronic process||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I simulate 60 MeV proton into 1 mm of natural tin and I look at the angular distribution using different physics list.
First of all when I use only a physics list with the multiple scattering I have the expected behavior with a gaussians a low theta and a Rutherford tail for larger theta. However I want to use hadronic processes, so in a second step I loaded the HadronicElastic process as well as the Binary cascade using the Tripathi and Shen cross section parametrization and I was expecting a drop of the number of counts after the grazing angle while the behavior is similar to the multiple scattering one up to 30 degrees and the counts become higher at larger angle (I attached the picture here: red for only MSC and blue for MSC+hadronic process).
Should I load another specific physics list or cross section to see the drop in the number of counts around the grazing angle?
I am doing this test because I wand to estimate the efficiency loss of detecting the full energy due to nuclear reaction in a material.
Thank you for your help.
|Inline Depth:||Outline Depth:||Add message:|