|Message: problem with the physics lists in G4.10.01 by using Gate 7.1||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear G4 users,
I am using Gate v7.1, based on G4.10.01. The Gate-collaboration suggests to use the 'Physics-List builders', which I have successfully done so far. Nevertheless, I would like to check some differences between the Bertini, BinaryCascade and PreCompound models. However, when I try to use whatever of these models, I get this error (no matters the material that I use):
-------- EEEE ------- G4Exception-START -------- EEEE ------- *** G4Exception : had002 issued by : G4HadronicProcess::GetMeanFreePath In /afs/in2p3.fr/group/imnc/guardiol/geant4.10.01/source/processes/hadronic/cross_sections/src/G4CrossSectionDataStore.cc, line 198: ===> no applicable data set found for the isotope Unrecoverable error in the method GetMeanFreePath of HadronElastic TrackID= 390 ParentID= 1 N15 Ekin(GeV)= 0.00331308; direction= (-0.573697,-0.205669,0.792825) Position(mm)= (44.0667,51.2536,53.7498); material Water PhysicalVolume <WaterCube_phys> Cross section is not available
*** Fatal Exception *** core dump *** -------- EEEE -------- G4Exception-END --------- EEEE -------
I saw in a post (24 July 2015) that someone had a similar problem and it was solved in the 10.1.p02, but since Gate v7.1 only works with the G4.10.1 version (without patches), I wonder if someone had similar problems and how you figure it out.
I would appreciate whatever feedback. Thanks in advance! Consu.
|Inline Depth:||Outline Depth:||Add message:|