|Message: Re: Simulation of an AmBe-neutron source||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
1. Well, I have found that BeO powder with 99.5% chemical purity is used. Bulk density of the powder ranges from 1.2 to 1.4 g/cm3. I do not know the exact ratio between Be- and Am- oxides but it seems to me that there should be much more Be- oxide than Am- oxide (maybe several orders of magnitude?).
2. JENDL-3.3 library contains data for (a,na) and (a,n') reactions, so it is possible to add this data to the corresponding directiories (F06 and F01) under G4TENDL.
3. Try to disable elastic process for alpha and check if the warning still appears.
|Inline Depth:||Outline Depth:||Add message:|