|Message: B-10 cross section in Geant4 wrong?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear G4 experts/friends, I'm using G4 for dose simulation of boron neutron capture therapy. I used three different physicslist: QBBC, QGSP_BERT_HP, QGSP_BIC_HP I changed the boron-10 concentration in my model and QBBC gave me a result which is quite different to QGSP_BERT_HP and QGSP_BIC_HP. I would like to trust QGSP_BIC_HP or QGSP_BERT_HP since the neutron source I use is 2eV single energy, single direction source. But when I increase the boron concentration, the QGSP_BERT_HP and QGSP_BIC_HP told me that the dose will decrease which is obviously wrong. I was really confused about this result. Attach_1 is my model and material description. Attach_2 is the results with different models.
Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2016/03/10/10.39-21785-Attach_1.pdf http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2016/03/10/10.39-65710-t_concentration_B-10.xlsx
|Inline Depth:||Outline Depth:||Add message:|