|Message: Cross section is not available?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am simulating 56Fe ion on G4_C at 1 GeV/n with Binary Light Ion Cascade model and using geant4.10.01.p01. While simulating below 1 GeV/n, program is running fine, however, for higher energies above 1 GeV/n, it is giving error.
In /root/simu/g4/geant4.10.01.p01/source/processes/hadronic/cross_sections/src/G4CrossSectionDataStore.cc, line 198: ===> no applicable data set found for the isotope Unrecoverable error in the method GetMeanFreePath of IonInelastic TrackID= 1 ParentID= 0 Fe56 Ekin(GeV)= 56; direction= (0,0,1) Position(mm)= (0,0,-1); material G4_C PhysicalVolume <Target> Cross section is not available
*** Fatal Exception *** core dump *** -------- EEEE -------- G4Exception-END --------- EEEE -------
Please let me know what should I do to overcome this problem?
|Inline Depth:||Outline Depth:||Add message:|