|Message: Re: Alternative interaction cross-section libraries||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm primarily interested in the lower energy range that would be present at the Bragg peak, but I don't want to set this as a limitation since the higher energy ranges should also influence my measurements.
I would ideally like to switch it to the PADF-2007 cross section library, since it is in ENDF format, includes significantly more isotopes, and was specifically created for activation studies.
I don't work with Geant4 directly...I work with the TOPAS extension, so I am not familiar with the underlying code or where these libraries are located in order to change them.
|Inline Depth:||Outline Depth:||Add message:|