|Message: Problem with G4HadronicProcess||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm trying to simulate the interaction of a protons beam by 1 Gev with a target of kevlar.
I have a problem when I register the class G4HadronicProcess to G4GenericIon.
This is the error message:
-------- EEEE ------- G4Exception-START -------- EEEE ------- *** G4Exception : had002 issued by : G4HadronicProcess::GetMeanFreePath In src/G4HadronCrossSections.cc, line 1716: ===> G4HadronCrossSections::GetParticleCode: unsupported particle Unrecoverable error in the method GetMeanFreePath of hadElastic TrackID= 6060 ParentID= 1 C12[0.0] Ekin(GeV)= 0.000545205; direction= (-0.788129,0.614458,0.0359897) Position(mm)= (0.289683,0.0548941,27.6618); material kevlar1 PhysicalVolume <Target> Cross section is not available
*** Fatal Exception *** core dump *** -------- EEEE -------- G4Exception-END --------- EEEE -------
*** G4Exception: Aborting execution *** Abortito
Can you help me?!? Thanks, Alessandro.
|Inline Depth:||Outline Depth:||Add message:|