|Message: Cross section verbose||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
continuing from a slightly older thread.
Running in 9.6 and also 9.5 I get the following:
Hadronic Processes for <neutron> ----------------------------------- NeutronInelastic Models: NeutronHPInelastic: Emin(GeV)= 0 Emax(GeV)= 0.02 Binary Cascade: Emin(GeV)= 0.019 Emax(GeV)= 20
NeutronInelastic Crs sctns: GheishaInelastic: Emin(GeV)= 0 Emax(GeV)= 100000
nFission Models: G4LFission: Emin(GeV)= 0.019 Emax(GeV)= 1.79769e+305 NeutronHPFission: Emin(GeV)= 0 Emax(GeV)= 0.02
nFission Crs sctns: NeutronHPFissionXS: Emin(GeV)= 0 Emax(GeV)= 0.02 GheishaFissionXS: Emin(GeV)= 0 Emax(GeV)= 100000
All the limits for the models seem to be as intended, but there is something puzzling me with the xsecs. As I was told in the last thread I discussed that, the top xsec is the one used. So:
- For the Neutron Inelastic, HP model will handle interactions from 0-20MeV and BIC 19MeV-20GeV. In the xsec though, I see only the default Geisha for the whole range. Is really Geisha xsec used in 0-20MeV? As far as I know, the HP uses the HP tabulated xsecs, can it be that Geisha xsecs are used in 0-20MeV in conjuction with the HP model?
- For the fission, again the model limits are as intented, but which xsec will be used in 0-20MeV and which from 19MeV and higher? Is NeutronHPFissionXS overwriting just the 0-20MeV part or the GheishaFissionXS is cancelled completely?
|Inline Depth:||Outline Depth:||Add message:|