|Message: Re: Problem with||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
This is likely a small energy non-conservation, since we have checks in place against large ones. Unfortunately the routine giving this warning (Pmx) is eventually used by both the FTF and Bertini models, so it's hard to know where to look. Can you isolate the event by its random number and then re-run it with a high verbosity level? The output from this would help narrow things down.
You might also lower your incident beam energy to 4 GeV or below and see if the warning still appears. If not, that means FTF is at fault.