|Message: alpha inelastic cross section..||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I'm running the example Hadr00 with Geant4.9.4 and noticed that for alpha projectiles on aluminum, the inelastic cross section that is printed to screen does not vary with energy at all (result is always 1.031 barns).
I believe the Tripathi cross sections are being used here, so there should be some energy dependence. The result of 1.031 barns looks like it might be an average cross section?
Any guidance on this would be helpful.
Thanks, Tony Slaba
|Inline Depth:||Outline Depth:||Add message:|