|Message: Re: Low-energy nuclei in gas||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
When I look at the tracking of the triton, the main interaction process is indeed ionization. I show a few representative tracking histories in an attached text file. The tracking appears to always place the first step of the triton at the same distance (0.193mm) from the location where the triton is injected. Is this the result of some kind of tracking cut in geant4? I must confess that I'm not particularly familiar with tracking cuts in geant4. If this could be a cut effect, is it straightforward to change the cuts?
I am using geant4.9.5.p01, which I neglected to mention in my first message.
|Inline Depth:||Outline Depth:||Add message:|