|Message: Re: tot (p+12C) non elatic XS is very law||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Fri, 18 Jan 2013 16:20:33 GMT, Jeyasingam Jeyasugiththan wrote:
> Hi michel, > > Thank you very much for your mail with details. I already deactivated > the EM and elastic process etc using /process/inactivate and only proton > inelastic is active. > > ____________________________________________________________________ > > CROSS SECTION MEASUREMENTS > ____________________________________________________________________ > > The run consists of 100000 proton of 7 MeV through 20 m of Carbon (density: 2.267 g/cm3 ) > > Process calls frequency ---> ProtonInelastic= 100000 > > fTotalcount 100000 > > MeanFreePath: 1.2883 m +- 1.2892 m massic: 292.06 g/cm2 > CrossSection: 0.0077621 cm^-1 massic: 342.4 um2/mg > CrossSection: 68.218 mb > > Verification : crossSections from G4HadronicProcessStore: > ProtonInelastic: Cross Section = 67.989 mb massic XS = 341.25 um2/mg > > total massic XS = 341.25 um2/mg > > with regards Sugi
OK, much better now ! Michel
|Inline Depth:||Outline Depth:||Add message:|