|Message: Re: Cl(n,p) Excited States Energy Shifts?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi Vladimir, Please find attached a comparison between Geant4.9.4.x and Geant4.9.5.x. I checked the kinematic broading and leading edge of each peak. The ground state (highest energy peak) is at the correct place and has the proper kinematic broading, however, all the excited states are shifted. 35S Excited states: 2938.64(11) 2717.10(16) 2347.78(10) 1991.33(5) 1572.372(6) 0 (ground) Incoming neutron energy (En) was set to 4.7MeV. Q-value for 35Cl(n,p) reaction is 0.615MeV Therefore, the upper edge of the ground state should be at ~5.315MeV. Next, the upper edge of the 1st excited state should be at ~3.74MeV. This is indeed the case for MCNPX but not for Geant (as shown in attached figure). Below are the data versions I'm using for Geant4.9.5.x: G4LEVELGAMMADATA=/.../PhotonEvaporation2.2 G4NEUTRONXSDATA=/.../G4NEUTRONXS1.1 G4LEDATA=/.../G4EMLOW6.23 G4NEUTRONHPDATA=/.../G4NDL4.0 G4RADIOACTIVEDATA=/.../RadioactiveDecay3.4 G4ABLADATA=/.../G4ABLA3.0 G4PIIDATA=/.../G4PII1.3 G4REALSURFACEDATA=/.../RealSurface1.0 I'm open to any comments or suggestions. Thank you in advance, Malachi Attachment: http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2012/06/04/06.11-92708-or_35Cln,p_Reaction.jpg
|Inline Depth:||Outline Depth:||Add message:|