|Message: Re: Simulating Neutron Physics||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I would strongly recommend replace Physics List you have shown by another solution because you have mixed two approaches for the Physics List together and results are hardly be predictable. There are different possibilities: 1) take directly QGSP_BERT_HP 2) use G4PhysicsListFactory - example is $G4INSTALL/examples/extended/hadronic/Hadr00 3) the most complicate is to follow $G4INSTALL/examples/extended/hadronic/Hadr01
You may choose one but not mixture.
Independently of that you can check your installation of Geant4 if you use Hadr00 without any change, define environment variable PHYSLIST=QGSP_BERT_HP, your materials of interest and primary neutrons. If you will get the same exception than installation of Genat4 has a problem or you do not have a path to G4NDL data library.
|Inline Depth:||Outline Depth:||Add message:|