|Message: Re: Adding data to the neutronHP libraries||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
On Thu, 25 Feb 2010 22:00:40 GMT, Mario wrote:
> the JENDL_HE folder (not sure what the energy threshold is for these > data files).
Only cross section is introduced from JENDL_HE. And its energy range is 20MeV to 3GeV.
> Is there a way that I can generate a data file for Geant4 from an ENDF-6 > file from NNDC, put it in the correct folder under G4NDL3.13/Inelastic > or Elastic, and therefore not use the Tungsten XS for the Tantalum > material?
> Or is there a way to make neutronHP use the file from JENDL_HE if in the > proper energy range?
Both answers are "NO", unfortunately.
If you want to have a data for Ta, then please propose at "Geant4 Technical Forum".
|Inline Depth:||Outline Depth:||Add message:|