Message: Re: Double cone Not Logged In (login)

## Re: Double cone

Forum: Geometry
Re: Double cone (Rohin)
Date: 17 Nov, 2009
From: John Apostolakis <John Apostolakis>

 ```Have you considered using two cones ? In the case that you can live with them as separate solids, it should be very simple: create two cones and put them back to back. A / \ | | C \ / B If they must be part of one solid, you can create a solid either using - an intersection of two cones of the full length (length AB) or else - by union of the cones with the half length ( AB/2 ) . Best regards, John On Nov 17, 2009, at 3:04 PM, Rohin wrote: > > *** Discussion title: Geometry > > Hello > > I wanted to make a double cone geometry in Geant4. The scheme of the > cone is attached with this post. I have no clues how to start with. > Could any one please give some intro to get started > > Thank you > > Attachment: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/AUX/2009/11/17/06.03-85402-doublecone.pdf > > ------------------------------------------------------------- > Visit this GEANT4 at hypernews.slac.stanford.edu message (to reply > or unsubscribe) at: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/geometry/997.html ```

 Inline Depth: Outline Depth: Add message:

1 Re: Double cone   (Rohin - 19 Nov, 2009)
 to: "Re: Double cone"
This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews

[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]