|Message: Geometry Parameterization||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hello, I am using a quartz sphere to generate photons. I surrounded the sphere with air so that there is a large difference in the dielectric constant. On one hemisphere of the sphere are 121 parallel quartz channels that overlap into the sphere. The channels were made to guide the photons. Originally I had an array of 121 different Tubs (channels) and this worked fine.
Then I changed to use only One Tub Solid, One tub Logical, and an array of 121 Tub locations. Now the photons do not go into the channels from the overlapping sphere. Does anyone have any idea why?
|Inline Depth:||Outline Depth:||Add message:|