|Message: Re: Help with G4PVReplica||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi Karthik, > 23 replicas of 4 mm crystals separated by 4.1 mm gives a x-extend of > (22*4.1)+4 = 94.2 mm while the mother x extent is 95.2 mm. Can anyone point > out what I am doing wrong? replicas are to be intended as slices of a given volume, without gaps or offsets. In your case, all the replicated crystals must -fill- the 'Module' box in all its dimensions. It doesn't seem to me it does so (the width in X for a single replica should be 96.2/23*mm, as well as for the dimensions of the corresponding box, which should also correspond to the size of the 'Module' box for Y and Z) ! Otherwise, if you need to define offsets or varying widths, you should use divisions instead. Cheers, Gabriele PS: Can you please provide information about your affiliation and use you're doing of Geant4 ? Thanks.