|Message: cylinder going through another cylinder||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I need to compute the following geometry : a cylindrical detector is passing through a cylindrical lead shield, at right angle. So there is an intersection of 2 cylinders being perpendicular in respect to each other. Also, the detector is crossing the wall of the shield, so that one side of the detector is inside the cylindrical shield, and the other side is outside.
How can I compute this in Geant4 ?
|Inline Depth:||Outline Depth:||Add message:|