Message: Re: parabolic mirror Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: parabolic mirror 

Forum: Geometry
Re: None parabolic mirror (Hans Wenzel)
Re: None Re: parabolic mirror (John Allison)
Date: 28 May, 2008
From: Hans Wenzel <Hans Wenzel>

Hi John

Thanks that did the trick :-)


John Allison wrote:
> *** Discussion title: Geometry
> Email replies to must include:
>   In-Reply-To: <"/geometry/910/1">
>   Subject: ...change this to be about your reply.
> I think the problem might be that dz=10*mm is the same for each solid.
> Or rather, that this implies that the +/-dz surfaces are coincident and
> they don't get subtracted for visualisation. Make theparaboloid a little
> bigger, dz=10.001*mm.
> The problem is only in visualisation - the tracking might be OK.
> I am not able to advise on the optical properties.

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

 Add Message Add Message
to: "Re: parabolic mirror"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews

[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]