|Message: Re: Surface/boundary roughness||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear Sergey, Geant4 does offer the capability to define surface properties for the purpose of optical photon simulation. If this is your application area, please check the user documentation at our web site http://cern.ch/geant4, following links in the column on "User Support" - either the picture or directly the 'user guides' link. Else could you please provide more information? Best regards, John Apostolakis Gorelick Sergey wrote: > *** Discussion title: Geometry > Email replies to PublicHyperNews@slac.stanford.edu must include: > In-Reply-To: <"/geometry/900"@geant4-hn.slac.stanford.edu> > Subject: ...change this to be about your reply. > > Hello, > > Normally, the volumes defined in GEANT4 have extremely flat surfaces > (atomically flat). Real volumes, however, have some roughness that > depends on the polishing, for instance. I was just wondering is there a > way to simply define the surface or a volume boundary roughness? Lets > say a roughness that has a Gaussian peak-to-valey deviations along the > surface? > > Thank you. >
|Inline Depth:||Outline Depth:||Add message:|