|Message: /gun/position||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I am working to create an application with source position at (-46.5,0,15) cm and the detector at (31.5,0,0). The detector dimensions are 0.15X40X30 cm.
I am using the UI command /gun/position to set the source position. When I place the source at (-46.5,0,0), I get the desired output on the detector. However when I move the source to (-46.5,0,15), there is no output at the detector. When I move the source to (-46.5,0,-15), it works fine. I also tried to hardcode the gun position in the PrimaryGeneratorAction. I see the same effects.
Does anyone have any suggestions as to what might be happening or some mistake that I might be making when setting this geometry? Any help is much appreciated. Thanks in advance! Best regards, Reema
|Inline Depth:||Outline Depth:||Add message:|