|Message: Problems with tolerances in Geant v.4.9.0||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I installed the latest geant4.9.0 release (with CLHEP 22.214.171.124) and tried to run my application (which was working nicely with previous geant4 releases such as 4.8.3, 4.7.1, ...). I obtain several errors concerning the geometry definition. I am generating my volumes with my own class handling irregular convex polyhedra, which inherites from G4CSGSolid and should therefore handle the tolerances in the proper way, yet several points which should be inside the solids are seen as "surface" or "outside". The situation does not change if I change the tolerance value for this particular class. Any suggestions?
|Inline Depth:||Outline Depth:||Add message:|