Message: Re: creating volumes with 'holes' using G4AssemblyVolume Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

Feedback Re: creating volumes with 'holes' using G4AssemblyVolume 

Keywords: assembly volume imprints
Forum: Geometry
Re: Question creating volumes with 'holes' using G4AssemblyVolume (Mario)
Date: 26 Jun, 2007
From: Gabriele Cosmo <Gabriele Cosmo>

Hi Mario,

verify that in your geometry you are free of overlaps. If you're using version 8.3, you
can do this at the time you construct your geometry and place the different volumes (see
the documentation), also for the constituents of each assembly.

Cheers, Gabriele

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 None: Re: creating volumes with 'holes' using G4AssemblyVolume   (Mario - 26 Jun, 2007)
(_ None: Re: creating volumes with 'holes' using G4AssemblyVolume   (John Apostolakis - 28 Jun, 2007)
(_ None: Re: creating volumes with 'holes' using G4AssemblyVolume   (Mario - 28 Jun, 2007)
 Add Message Add Message
to: "Re: creating volumes with 'holes' using G4AssemblyVolume"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]