|Message: RE: Multiple Geometry Updates Necessary?||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
After changing the geometry, I use the /testem/det/update UI command to rebuild the detector. I have tried using the /run/geometryModified command before updating the geometry, but this has not helped. Is there an additional command to flush or delete all the volumes that I should use? I am not sure what you mean about deleting/instantiating the volumes properly Several of the volumes are touching, but I do not think they overlap. There are no problems when the detector is on the beam axis and they are all rotated with the same G4Transform3D object so they should be moved together. I will try setting the geometry test flag anyway, just to be sure. Thank you for your suggestions and advise!
|Inline Depth:||Outline Depth:||Add message:|