|Message: Re: GDML||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I have tried your advices:
>Idle> ls vis/geometry/set > Command directory path : /vis/geometry/set/ > Guidance : > Set vis attributes of Geant4 geometry. > Sub-directories : > Commands : > colour * Sets colour of logical volume(s). > daughtersInvisible * Sets daughters of logical volume(s) invisible. > lineStyle * Sets line style of logical volume(s) drawing. > lineWidth * Sets line width of logical volume(s) drawing. > forceAuxEdgeVisible * Sets auxiliary (soft) edges of logical volume(s) drawing visible. > forceSolid * Sets logical volume(s) drawing always to be as solid (surface drawing). > forceWireframe * Sets logical volume(s) drawing always to be as wireframe. > visibility * Sets visibility of logical volume(s). > Idle> help /vis/geometry/set/colour > Command /vis/geometry/set/colour > Guidance : > Sets colour of logical volume(s). > "all" sets all logical volumes. > Optionally propagates down hierarchy to given depth. > Parameter : logical-volume-name > Parameter : depth > Depth of propagation (-1 means unlimited depth). > Parameter : red > Red component or a string, e.g., "blue", in which case succeeding colour components are ignored.
And for some reasons the logical volume desappears at all and then when I tried to verify which colours attibutes. Then its shows colours (1.37889e-306,5.16367e-306,0,1). I guest that the command: /vis/geometry/set/colour() is not working when I have the geometry defined in GDML format.
|Inline Depth:||Outline Depth:||Add message:|