|Message: Surface Properties:how to model a diffusive (98%) and absorbing (2%) surface||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear G4Users, I'm trying to model a segmented scintillator: NaI crystals inclused in an epoxy matrix. I have problems simulating the scintillator's behaviour: particulary to set the attributes of the surfaces defined by the boundary of the epoxy matrix and the inclused crystals. The surface has to diffuse optical photon (98%) or absorbing (2%) them. How could I implement it??? Thank you for your help, you are so efficient!!! Maria Lucia Magliozzi
|Inline Depth:||Outline Depth:||Add message:|