|Message: Visualisation of G4SubtractionSolid Box||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, I have a problem where I have created a detector inside a 0.6 mm Aluminium housing. the housing is created by subtracting two G4Boxes from each other. The tracking of particles through the box appears to be correct for any thickness box I set however when being visualised on OpenGL it only shows a single box outline and the same in vrml wrl visualisations, irrespective of how thick I have set the box to be. When I have visualised the geometry on DAWN (mainly to use DAVID to ensure there is no overlapping geometry) the box is not drawn at all.
The simulation appears to be running correctly and as I said before, GEANT is tracking the particles through the sides of the box for the correct thickness.
Any Help would be greatly appreciated.
|Inline Depth:||Outline Depth:||Add message:|