|Message: Re: Torus running from -170*degree to 180*degree||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
I also have problem with g4torus. I think dPhi is not what it should be. For example if you put opening angle to be 90.deg and dPhi=45.deg you will get the segment of 135.deg(=90+45). Playing around with numbers I was able to get what I want, however when I put another g4torus inside and do geometry/test/recursive_test I get a bunch of messages like:
GeomTest Error: SolidProblem Spurious entering intersection point Solid name = CPipe_tor Local position = -1.45852 1.89374 -0.294 cm
and segmentation error in the end. Is there a way to solve that problem and does it affect tracking? I'm using geant4.6. Thanks,
|Inline Depth:||Outline Depth:||Add message:|