|Message: define a relecting surface||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi! I'm new to Geant4, so maybe my questions are a little stupid.
I have been trying to simulate neutron transportation using Geant4, and my model consists of several tubes,whose origins are located in the same point.My neutron source is a tube too and all these tubes share the same center.
In order to get the relationship between the neutron flux and the radius of different side surfaces of those tubes, I want to have those upper and lower surfaces of the tubes set as reflecting surfaces(i.e.,a particle track that hits a reflecting surface is reflected specularly.), but I haven't found out how to achieve this. Can anyone help me fix this? Thank you sincerely.
|Inline Depth:||Outline Depth:||Add message:|