|Message: definition of dynamic geometry by using G4PVParameterisation::ComputeSolid/ComputeTransformation||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Hi, I am trying to define dynamic geometry by using the Parameterisation class.
What I did for this is to get the event number from ComputeSolid/ComputeTrasforamtion method and define the geometry according to the event number.
However, I am not sure if this will work.
Because, according to my understanding, Geant4 invokes the methods for Parameterized geometries when a particle reaches to the geometry involved in the Parameterized geometry, but if the geometry continuously changes its position or dimension according to the event number, it may be difficult to judge if the particle is in the parameterized geometry or not.
It would be very appreciated if you could tell me if this may work, and how this works/or why dose not work.
Thank you in advance!!