Message: Re: Problem with G4UnionSolid Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

None Re: Problem with G4UnionSolid 

Forum: Geometry
Re: Question Problem with G4UnionSolid (Emanuele Leonardi)
Date: 28 Feb, 2017
From: John Allison <John Allison>

This is a vis problem. Tracking should be OK.

But it is not clear to me why you need to do this? Tracking should be OK even with a succession of adjacent boxes and trapezoids.

There is an "experimental" class, G4MultiUnion, which is available if you build with GEANT4_USE_USOLIDS - see Installation Guide and Section 4.1.2.4 "Unified Solids" of the Application Developers Guide.

Alternatively just try shrinking the volumes a tiny amount, 1 nm or um, although that might slow down tracking a little.

 Add Message Add Message
to: "Re: Problem with G4UnionSolid"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]