|Message: Re: G4Exception : GeomNav1002||Not Logged In (login)|
Click on the Forum title, e.g. on the "Forums by Category" page, to read a sequence of postings to the Forum and its threads all in one page. If you are only interested in one thread or the thread following a specific posting, click the thread or the posting, which takes you to a smaller page, which contains only the part you are interested in and may be easier to navigate.
Messages are "chained" if there are only replies at the first level, i.e. 1/1.html, 1/1/1.html etc. In case of "chained" messages the message number is replaced by the icon and there is no indentation.
Inline: Display the subject line only or also the text of the posting(s); for the choice "All" the "Outline" choices are switched off.
|1||0||1||no text / full text of posting|
|2||1||All||text for level 1 only / text for All postings|
Outline: Choose the depth of the posting thread, successive toggle controls provide increasing detail.
|1||2||1||2 levels / 1 level (original posting)|
|2||3||2||3 levels / 2 levels|
|3||3||All||3 levels / all levels (all postings)|
Dear Yazdan, The warning message which you report is a minor issue from which the Navigator can recover. It is not clear that that, if the program hangs, there is a problem connected with this issue. Without further information it is difficult to provide advice how to proceed to identify the source of the problem. What version of Geant4 are you using ? Are you running in sequential or multi-threaded mode? What operating system and compiler are you using ? If you re-run with the same random number seed, do you get the same results ? What energy are your primary particles - and what type of particles ? How long does an event take ? If the energy is low, and the time limited, I suggest that you re-run the last event (or few events) with /tracking/verbose 1 to help demonstrate where the problem occurs. Do you have other volumes in your geometry, and how do they relate to the DICOM volume ? Best regards, John Apostolakis On 13/02/17 07:39, elnaz yazd wrote: > *** Discussion title: Geometry > > Dear Sir/Madam > > I am running DICOM example with data from CT for head. The geometry is > 110 layer with 128x128 voxels for each layer and the dimension of voxels > are (2.01562mm, 2.01562mm, 1mm). The following error is happens with > some initial seed numbers and program hangs in this format. As it is > clear the problem happens in the voxel around the origin of local point. > Please help me to get ride of this problem. > > Track stuck or not moving. > Track stuck, not moving for 10 steps > in volume -phantom- at point (1.17148,-1.36137e-10,-170) (local point (0.163671,1.00781,-0.5)) > direction: (0.0296006,4.86496e-05,0.999562) (local direction: (0.0296006,4.86496e-05,0.999562)). > Potential geometry or navigation problem ! > Trying pushing it of 1e-07 mm ...Potential overlap in geometry! > > *** This is just a warning message. *** -------- WWWW -------- > G4Exception-END --------- WWWW ------- > > With Best Regards, Yazdan > > ------------------------------------------------------------- > Visit this GEANT4 at hypernews.slac.stanford.edu message (to reply or unsubscribe) at: > http://hypernews.slac.stanford.edu/HyperNews/geant4/get/geometry/1519.html
|Inline Depth:||Outline Depth:||Add message:|