Message: How to eliminate the effect caused by the boundary of two connected solids Not Logged In (login)
 Next-in-Thread Next-in-Thread
 Next-in-Forum Next-in-Forum

Question How to eliminate the effect caused by the boundary of two connected solids 

Forum: Geometry
Date: 21 Aug, 2016
From: liyong <liyong>

Dear all,

I defined two kinds of detector geometry which are expected to be equivalent, but they are not.

The first one is a full solid sphere (R1 = 0-100cm, position (0,0,0)). The another one is composed by two spheres(R2 =0-90cm, position(0,0,0)) and (R3 = 90-100cm, position(0,0,0)).

I incident same mount of energetic protons on the detector surface and detect the proton flux at r1 = 95cm and r2 = 85cm. The results of the two kinds of geometry are different both at r1 and r2. I think the difference is caused by the boundary of sphere2 and sphere3 at 90cm even the material of them are same. I want to know how to eliminate the effect caused by the boundary?

Please give me a help if you have any idea about this. Thank you in advance!

liyong

Inline Depth:
 1 1
 All All
Outline Depth:
 1 1
 2 2
 All All
Add message: (add)

1 Question: Re: How to eliminate the effect caused by the boundary of two connected solids   (liyong - 28 Aug, 2016)
(_ None: Re: How to eliminate the effect caused by the boundary of two connected solids   (michel maire - 29 Aug, 2016)
(_ None: Re: How to eliminate the effect caused by the boundary of two connected solids   (liyong - 08 Sep, 2016)
1 None: Re: How to eliminate the effect caused by the boundary of two connected solids   (michel maire - 18 Sep, 2016)
2 None: Re: How to eliminate the effect caused by the boundary of two connected solids   (michel maire - 19 Sep, 2016)
1 None: Re: How to eliminate the effect caused by the boundary of two connected solids   (liyong - 21 Sep, 2016)
 Add Message Add Message
to: "How to eliminate the effect caused by the boundary of two connected solids"

 Subscribe Subscribe

This site runs SLAC HyperNews version 1.11-slac-98, derived from the original HyperNews


[ Geant 4 Home | Geant 4 HyperNews | Search | Request New Forum | Feedback ]